Split16 Input/Output 

• Serial cables
  • RS232 Serial port cable ( from Split16 to a P.C. with DB9pin)
  • RS232 Serial port cable ( from Split16 to a P.C. with DB25pin)
  • RS232 Serial port cable ( from Split16 to Split16 "bridge" )
• Video Cables
  • Standard video cables (Avialec/Hantarex/Seleco/Selti)
  • Video Cables for Pioneer Cubes

• Connectors Pinning
  • RGBs Input
  • SVHS Input
  • RGBs Outputs

RS232 Serial port cable ( Split16 -> PC/DB9)

Split16	PC
2	3
3	2
5	5

The cable has a DB 9/Male on the Split16 side and a DB 9/Female on the PC side and is a 2 conductors + ground (shield).

!!! On the PC side, the pins 4 and 6 , and the pins 7 and 8 must be shorted !!!

RS232 Serial port cable ( Split16 -> PC/DB25)

The cable has a DB 9/Male on the Split16 side and a DB 25/Female on the PC side and is a 2 conductors + ground (shield). On the PC side, the pins 6 and 20 , and the pins 4 and 5 must be shorted.

Split16	PC
2	3
3	2
5	7

RS232 Serial port cable ( Split16 ->Split16 bridge )

Split16 1	Split16 2
2	3
3	2
5	5

The cable has a DB 9/Male on both ends and is a 2 conductors + ground (shield).

Standard video cables (Avialec/Hantarex/Seleco/Selti)

Split16	Monitor
1	3
2	4
3	5
4	8
5	1,2

The cable has a DB 9/Male on the Split16 side and a DB 9/Male on the monitor side and is a 4 conductors + ground + shield (5 conductors + shield). Is marked "S" to the Splitter and "M" to the monitor. The cable length should not exceed 25 mt. ; for longer lengths, some special kind of cable is needed, please contact us for availability.

Note that the shield should be connected to the metal frame of only one of the two connectors.

Video Cables for Pioneer Cubes

Split16	Monitor
1	1
2	2
3	3
4	5
5	4

The cable has a DB 9/Male on the Split16 side and a DB 9/Female on the cube side and is a 4 conductors + ground + shield (5 conductors + shield). The cable length should not exceed 25 mt. ; for longer lengths, some special kind of cable is needed, please contact us for availability.

Note that the shield should be connected to the metal frame of only one of the two connectors.

RGBs Input

The RGBs input connector of the Split16 is a DB 9/Male with the following pin out:

1. R
2. G
3. B
4. GND
5. Composite-Sync (0.5-5 Vpp Negative Sync)
6. N.C.
7. N.C.
8. N.C.
9. N.C.

SVHS Input

1. GND
2. GND
3. CHROMINANCE ( C )
4. LUMINANCE ( Y )

RGBs Output

The RGBs output connector of the Split16 is a DB 9/Female with the following pin out:

1. R
2. G
3. B
4. Composite-Sync (5 Vpp Negative sync)
5. GND
6. N.C.
7. N.C.
8. N.C.
9. N.C.