EagleEye
|
|
|
Choosing the Euvision’s EagleEye for your Video Processing needs is a smart, flexible, powerful and cost effective choise. The new revolutionary multipurpose image processor allows high end Video and Data signals processing at the highest available quality standards. The EagleEye system is a BUS based system; the BUS can accept three kinds of Boards. All the Boards are 10x16cm “slide” Eurocard Type; this solution allows the customer to service and upgrade the system quickly (all the Boards must be inserted and disconnected powering off the system). 1) Video Board has two BNC plus two MiniDin connectors (S-VHS type). This board allows you to have many different input, where to connect your video sources, using the inbound “Y” adapter cables: 2 S-Video + 2 CVBS or 1 S-Video + 4 CVBS or 6 CVBS.The system is delivered with N° 1 built in Video board.
2) DATA Board. Each Data Board has two HD15 Input connectors where is possible to connect two different PC sources. Each Input accepts video resolutions starting from VGA up to S-XGA (1280x1024). The system is delivered with N° 2 built in Data Boards for max 4 PC sources.
3) OUTPUT Board. Based on powerful Pixelworks chip PW164, each Output Board allows you to choose the RGBHV output between 15 kHz, VGA, S-VGA and XGA resolution. Each Board is totally independent and can have his own resolution. The system can be delivered with maximum 16 output boards per each EagleEye. Please keep in mind that each EagleEye has a 50 Pins expansion connector for flat cable that allows you to connect many EagleEye in cascade way. Just wiring the out of Master’s expansion connector to the input of “Slave” expansion connector with the flat cable, you will easy have a powerful and expandable DataWall system. All the sources must be connected only to the Master EagleEye because they will be buffered from the internal VideoData Matrix Board.
As you well have seen the EagleEye system is able to manage simultaneously 10 sources (4 PC + 6 CVBS maximum). The maximum system expandibility is 16 EagleEye (connected via FlatCable). Maximum enlargement is 16x16; minimum 0,80. The EagleEye is controllable via software (RS232 cable) or via inbound I.R. Remote Control. Using the RS232 or using the I.R. Remote control will not change the product philosophy |
Main Features- Colour temperature and gamma correction - VGA S-VGA XGA patterns generator - Scaler (e.g. Down-converter & Up-converter) - Gometry resizing (stretch - e.g. 4/3 in 16/9 - that means you can have a circle 4/3 in 16/9 Plasma Display) - Video Switcher (Any Input can be routed to any Output via remote IR or RS232) - Zoom In/Out (from 0,80 up to 16x) - Keystone correction on each output (full size selectable) - Inputs : 2x S-VHS (mini din) configurable as 4 CVBS 2x CVBS (N° 2 BNC) 4x RGBHV from 15 kHz to S-XGA (1280 x 1024) (N° 4 HD15) - Outputs: Up to 16x RGBHV (HD15) VGA/S-VGA/XGA for each EagleEye - 16 non volatiles memories recallable via I.R. Remote Control or RS232 - System expansion: Up to 16 EagleEye can be stacked together to drive e wall of max 256 Displays (Max enlargement 16x).
Info: info@euvision.com |